Features: 特點：

• 7 sizes with holding torque ratings from 68 to 1155oz-in (48 to 816 Ncm). 7，持有規模從68扭矩評級一一五五盎司中（48至816 Ncm）。
• NEMA 23 and 34 frame sizes available.類型NEMA 23和34幀尺寸可供選擇。
• ± 2% typical step accuracy. ± 2％精度的典型步驟。
• Operate in full-step (1.8°) or half-step (0.9°) increments.全操作步驟（1.8 °）或半步（0.9 °）增量。
• Can be microstepped to achieve increments as small as .0072°.可microstepped實現小至0.0072 °增量。
• Can operate at rates to 20,000 steps per second (6000 rpm).可以操作的速度每秒20,000（6000轉步驟）。
• UL and Canadian Recognized. UL和加拿大的認可。
• CE certification. CE。
• Can withstand over 2 times rated current without demagnetization.能承受過2倍額定電流不退磁。
• Motors available with optional encoder for closed loop applications.電機與閉環應用提供可選的編碼器。
• Wide range or windings available with 4 or 6 connections for use with bipolar or unipolar drives.繞組廣泛或有4個或6或單極與雙極驅動器使用的連接可用。
• Rugged construction to provide long life.堅固的結構提供長期的生活。
• Optional cast terminal box available.可選鑄鐵接線盒可用。

Epsilon 120-240V NT Motor Selection The NT motor is a high performance motor utilizing patented technology to maximize torque in a compact package. 小量120 - 240伏新臺幣電機選擇新臺幣電機是一種高性能的電機可以利用技術，大限度地在一個緊湊封裝的扭矩。 The NT motor uses powerful Neodymium magnets and manufactured with a segmented core to maximize stator efficiency. The NT motor has a very low inertia for applications that demand high accel and cycle rates.新臺幣電機采用了功能強大的釹磁鐵和核心的分段定子生產效率大化。新臺幣電機有一個非常低的應用需求高的慣性加速度和周期率。 NT motors are available in English (NEMA 23 or 34) flanges, with or without brakes.新臺幣電機有英語（類型NEMA 23或34）法蘭，帶或不帶剎車。 The standard encoder resolution is 2048 lines per rev.標準編碼器分辨率為2048轉速每行。 NT motors are supplied with MS style connectors.新臺幣電動機提供與MS型連接器。

Features: 特點：

• 90 to 264 VAC 1Ø input power. 90到264 VAC 1Ø輸入功率。
• Up to 37 lb-in continuous torque截至到37磅的連續扭矩
• 1000 LPR differential encoder standard. 1000車牌差分編碼標準。
• Drive options: Base, Indexing, and Indexing with DeviceNet.驅動器選項：基地，索引，并與DeviceNet的索引。
• Compact, space saving design, six-inch (152mm) panel depth including cables.緊湊，節省空間的設計，6英寸（152毫米）面板的深度，包括電纜。
• Pluggable connectors, Standard D-Shell andScrew Terminals.可插拔連接器，標準D -殼牌andScrew碼頭。
• State-Space Observer Control, which allows 10-1 inertia mismatch out of the box, and 50-1 with tuning.空間觀測控制，使開箱10-1慣性匹配，和50-1連微調。
• Free ServoPro software, and upgrades.免費ServoPro軟件和升級。
• Programmable, optically-isolated I/O.可編程，光隔離I / O的
• RS-232/485 serial communication interface using Modbus protocol.個RS-232/485串行通信接口采用Modbus協議。
• 14-segment status and diagnostic display, time-stamping of last 10 faults for easy troubleshooting. 14段狀態和診斷顯示，時間的過去10故障排除故障方便沖壓。
• Field programmable flash memory firmware (upgrades are free).現場可編程閃存固件（升級是免費的）。
• Auto-Tune support for any servo motor with encoder feedback.自動調為任何編碼器反饋伺服電機的支持。
• 24VDC auxiliary input for logic backup. 24Vdc的輔助輸入邏輯備份。